Enerdrive B-TEC LiFeP04 12v 125Ah G2 Lithium Battery
The ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
Smart Phone Monitoring System
The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet devices.
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery.
Specifications
Dimensions 318mm L x 165mm W x 232mm H
Weight ~15.5kg
Case Construction Hi Impact ABS Plastic
Storage Information ≤ 30 days -20°C ~ 60°C, 5~75% RH, ≥ 90 days -10°C~45°C, 5~75% RH
Self-discharge Rate ≤ 3% Per Month
Nominal Voltage 12.8V
Nominal Capacity 125Ah
Cycle Life (DOD – 80% under controlled conditions) 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature 0 ̴ 45°C
Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V
Standby (Float) Voltage 13.50 ̴ 13.80V
Maximum Charge Current 60A @ 25°C for 30mins
Recommended Charge Current 20~60A
Standard Discharge Specification
Battery Discharge Temperature -20 ̴ 60°C
Battery Output Voltage Range 11.00 ̴ 14.60V
Maximum Discharge/Pulse Current 100A @ 25˚C ±5˚C for 30 mins
Pulse Discharge Current 450A for 1.0s
Discharge Cut-off Voltage ≤11.20V
Circuit Protection The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & amp discharge, to protect the battery pack from overcharge, over discharge & amp short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell 3.90V ± 0.03V
Over-charge Release Per Cell 3.60V ± 0.05V
Over-charge Release Method Discharge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell 2.80V ± 0.05V
Over-discharge Release Per Cell 3.20V ± 0.05V
Over-discharge Release Method Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button Yes
Over Current Protection
Discharge Over Current 110A for 30s – 450A for 1s
Protection Reset Time Approx. 10s Auto Release
Over Current Release Method Disconnect Load
Over Temperature Protection
Battery Discharge Over Temperature Protection to 65°C ± 5°C, Release at 50°C ± 5°C
Battery Charge Over Temperature Protection to 55°C ± 5°C, Release at 45°C ± 5°C
Short Circuit Protection Auto release after 5s
Enerdrive B-TEC LiFeP04 12v 125Ah G2 Lithium Battery
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
Smart Phone Monitoring System
The Enerdrive Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet devices.
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
The Enerdrive B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
Pre-order
If you select this option, your order will be dispatched within two business days from our warehouse, after the expected arrival date.
Currently, the expected arrival date for the Enerdrive B-TEC 12V 125Ah G2 Lithium Battery is: To Be Confirmed
Is there any difference between Pre-Ordered products and Buy Now products?
Absolutely not, they are identical in every way except Buy Now products are shipped within 2 days.
Please note that all orders are sent in a single shipment.
If you order a Pre-Order item AND a Buy Now item, the full order will be dispatched when the last item is ready for delivery.
Please let us know if you would like your order dispatched in multiple shipments – we will determine the revised shipping cost for you.
Please note with Pre-Ordering we are only able to advise the expected Consignment Date into Australia. The date the goods arrive at our warehouse for dispatch to you is dependent on many factors. If you require delivery by a specific date please inform us in the delivery instructions and we will try our best to meet that date.
Frequently asked questions
FAQ’s
Below are some of the most commonly asked questions we get, if you havent found the answer you need, get in touch.
Do we custom make, or alter our boxes?
We do not custom make any toolboxes or canopies and we do not make any custom alterations to our toolboxes or canopies.
Are the boxes powder-coated or painted?
Our Toolboxes and Canopies are powder-coated in UV Stabilised Powder Coat – The two colours are Black Scylla and Horizon White Scylla
How do you fix boxes to the tray?
We always recommend using 4 x M10 Bolts with a minimum 37mm washer to ensure the weight distribution is spread evenly over a greater portion of the material. For our canopies we only recommend bolting the canopies to trays.
Do you install?
Yes, we offer installation on all our products, Installation quotes are done on a case-by-case basis and will depend on the tray and products.
Do you have a store near me?
We have three stores around the country. Our showrooms are located in Pakenham, Bundamba and Marsden Park. We also proudly have a range of our products stocked by Autospec 4x4 in Perth. To find out the exact location of our stores, click the link and head to our store locater.