American Trays
Trays
Aluminium Canopies
Dog Boxes
Aluminium Toolboxes
Steel Toolboxes
Accessories
12V Camping Accessories
Ridge 4x4 Accessories
Ladder Racks
Fridges/Kitchen Slides
Under Tray Boxes
Truck Under Tray Toolboxes
Trailer/Caravan Boxes
Canvas Storage Bags
Swags
T.C THREADS
Gift Cards
ePOWER 12V 40A Battery Charger
The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.
As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 40A battery charger delivers four primary charge stages.
Features:
- Multistage Charging Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
- Separate Battery Banks Isolated charging design where battery bank one is separate from battery bank two and three.
- Programmable Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
- Current Control User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
- Smart Charging The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
- Wide AC Input Range Operates on both 110V / 60Hz and 240V / 50Hz.
- LED Display Easy to use “set and select” menu along with scrolling charger status.
- Silent Mode Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
- Temperature Sensor Battery temperature sensor included with 3 meter cable.
- 5 Year Warranty From an Australian company renowned for customer support.
Dimensions 295mm L x 206mm W x 86mm H
Weight 2.6kg
Optional Accessories Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations.
CHARGER OUTPUT
Output Current (Maximum) 40A
OUTPUT VOLTAGE RANGE
Charge 14.2 – 15.5 V
Float 13.4 – 13.8 V
Equalize 16.0 V
Charging Control Four stages (Bulk/Absorption/Float/Maintenance), Two stages (Bulk/Absorption), Constant Power Supply (Program setting), Priority Battery Bank Charging
DC Output Bank Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Standby Current < 2 mA
CHARGER INPUT
AC Input Voltage (Nominal) 90 to 265 VAC
AC Input Operating Range 207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)
AC Input Frequency Range 700W (Full Load)
Power Factor Correction Yes
Charger Efficiency 82%
PROTECTION AND FEATURES
Reverse Polarity Yes, (with user replaceable fuse/s)
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, (with user replaceable fuse/s)
Cooling Forced air ventilation (thermo controlled fan)
Temperature Setting Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light) Charging status, Battery Voltage, Output Current & Fault Codes
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection IEC with Supplied 1.2M Power Lead
DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
DC Output Ground Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range -40° to 70° C
Operating Range -20° to 60° C
Humidity 5-95%, relative humidity non-condensing
Ingress Protection IP32 (Basic drip proof in vertical orientation)
ePOWER 12V 40A Battery Charger
The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.
As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. Our ePOWER multistage smart 40A battery charger delivers four primary charge stages.
Features:
- Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
- Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
- Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
- Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
- Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
- Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
- LED Display: Easy to use “set and select” menu along with scrolling charger status.
- Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
- Temperature Sensor: Battery temperature sensor included with 3 meter cable.
- 5 Year Warranty from an Australian company renowned for customer support.
Pre-order
If you select this option, your order will be dispatched within two business days from our warehouse, after the expected arrival date.
Currently, the expected arrival date for the ePOWER 12V 40A Battery Charger is: To Be Confirmed
Is there any difference between Pre-Ordered products and Buy Now products?
Absolutely not, they are identical in every way except Buy Now products are shipped within 2 days.
Please note that all orders are sent in a single shipment.
If you order a Pre-Order item AND a Buy Now item, the full order will be dispatched when the last item is ready for delivery.
Please let us know if you would like your order dispatched in multiple shipments – we will determine the revised shipping cost for you.
Please note with Pre-Ordering we are only able to advise the expected Consignment Date into Australia. The date the goods arrive at our warehouse for dispatch to you is dependent on many factors. If you require delivery by a specific date please inform us in the delivery instructions and we will try our best to meet that date.
Frequently asked questions
FAQ’s
Below are some of the most commonly asked questions we get, if you havent found the answer you need, get in touch.
Do we custom make, or alter our boxes?
We do not custom make any toolboxes or canopies and we do not make any custom alterations to our toolboxes or canopies.
Are the boxes powder-coated or painted?
Our Toolboxes and Canopies are powder-coated in UV Stabilised Powder Coat – The two colours are Black Scylla and Horizon White Scylla
How do you fix boxes to the tray?
We always recommend using 4 x M10 Bolts with a minimum 37mm washer to ensure the weight distribution is spread evenly over a greater portion of the material. For our canopies we only recommend bolting the canopies to trays.
Do you install?
Yes, we offer installation on all our products, Installation quotes are done on a case-by-case basis and will depend on the tray and products.
Do you have a store near me?
We have three stores around the country. Our showrooms are located in Pakenham, Bundamba and Marsden Park. We also proudly have a range of our products stocked by Autospec 4x4 in Perth. To find out the exact location of our stores, click the link and head to our store locater.
